Living in a big house can give you some unique challenges. There can be several WiFi dead zones that leave your work completely interrupted. All you can do is use the router as an extender.
In this blog, we are going to take a look at the steps on how you can use your router as a wifi extender. By doing so, you can boost your signal to the other ends of the house. As a result, you will have no WiFi coverage issues.
However, the first thing you need to know is how to configure your router to extend its WiFi signal. This is otherwise known as Bridge mode or Repeater mode.
Now, before using the router as a WiFi extender, make sure it has Bridge or Repeater mode. Not all routers have this capability.
Steps to Use Router as WiFi Extender
- Turn on the router and make sure it has WiFi signals
- Update router firmware with the latest security features
- Log in to the router’s admin settings
- Go to the Wireless settings of the router and select Repeater mode
|Keep note that the exact phase may differ depending on the router model. So, it may otherwise be called Repeating mode, Wireless Bridge mode, Extender mode, or Repeater mode.
- Go to the WiFi network and connect to it using Username and Password
|Depending on the router model, the configuration steps may vary. You may be asked to give the Router’s IP address, admin information, and WiFi network login information.
- Save the changes
- Reboot the router, and your WiFi extender will work accordingly
- Now place the router in the location where you want to extend the WiFi signal
- Connect the device to this extended network to make sure that it works effectively
So, when you use router as WiFi extender, it may reduce the overall speed, but your house will be free of dead zones by extending and boosting your WiFi coverage.
Can Another Router be used as a WiFi extender?
If you have a spare router at home, you can use that router as an extender via an Ethernet cable. Although the steps may vary depending on the router model, the general process is the same.
In this section, let’s look at the common steps for extending Wifi signals using a router
Steps to Turn Router as Extender
- Update router firmware, especially if you have an old router at home
- Connect the Ethernet cable to the Ethernet port of your older router
- Plug the other end of the Ethernet cable into the WAN port to use it as a WiFi extender
- Login to the admin settings using the IP address and login information
- Go to the router’s wireless settings and then select AP mode
- Apply, Confirm, or Save the settings
Choosing this will make your router an access point for the internet connection and extend WiFi beyond the main range.
Now, don’t let those dead zones disrupt your work. Repurposing your router as a WiFi extender is a practical solution to expand your network reach. Just follow the outlined steps and maximize WiFi coverage instantly.
Internet Issues? We’ve got you covered
Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!