How to set up Netgear Nighthawk AC1900?

If you have been looking for faster and more reliable internet, the Netgear Nighthawk AC1900 is more than enough. So, whether you are looking for gaming purposes or work, this dual-band WiFi router comes with 1900 Mbps and works on multiple devices.

However, many users have reported connecting and dropping in the Nighthawk AC1900 router. So, in this blog, we are going to look at the various steps to set up your Netgear Nighthawk AC1900.

Before setting up your router, check whether you have an active internet connection from your ISP and identify the type of internet connectivity. Know the ISP credentials because you will need them before setting up the router.

Easy Steps for the Netgear Nighthawk AC1900 setup are

  • Open the web browser and enter the router’s IP address. 
  • The default IP addresses are either or
  • Enter the username and password

(Default username- admin)

(Default password- password)

You can also check the username and password on the router’s manual label

  • Many routers have a wizard setup to guide you through the initial configuration. 

Just follow the on-screen configuration and provide the necessary details like ISP credentials

  • Go to the router’s dashboard and navigate to the wireless settings

You may find other relatable options like WiFi, wireless options, or something similar. 

  • Change the default SSID to something unique to easily identify your network. 

This enhances your network and security, so avoid using default names too. You will also have the option to enable and disable SSID broadcasting. 

  • Go to security settings to configure the WiFi network. Choose the security settings or use WPA3 or WPA2 and set a strong password
  • Update the firmware of your router to ensure that it runs on the latest version. 
  • Change the default router settings for enhanced security
  • Test the connectivity of your router

If you are using a Netgear Nighthawk R7000 wifi router, check out the quick steps for setting it up. However, these instructions are just general guidelines for the Netgear Nighthawk AC1900. If you are having some specific issues related to router troubleshooting, get in touch with us.

Call Us For Instant Solutions

Don’t Let Printer Problems Hold You Back!

Pro-Tips to Maximize Netgear Orbi AX6000 Router Performance

You may find many routers on the market, but have you heard about the tri-band WiFi 6 mesh routers? Well, if you have been using older routers, it may be time to update your router to the Netgear Orbi AX6000. With its sleek look and speed up to 6000 Mbps and 6000 sq. feet, this WiFi 6 router has made a new name in the market.

However, many users have reported occasional drops in the signal speed. As a result, one can find a drastic drop in Orbi AX 6000 router performance. So, in this blog, we are going to look at some of the ways to enhance performance.

To enhance performance, you need to do certain things. The performance booster depends on the right satellite placement, optimization of WiFi settings, Mu-MIMO, and beamforming router.

To learn more about maximizing Netgear Orbi AX6000 performance, let’s dive in.

In today’s blog, we will learn about ways to enhance Netgear Orbi AX6000 router performance

What is a Netgear Orbi AX6000 Router?

The Netgear Orbi AX6000 router is a tri-band WiFi 6 mesh router that is known to provide speeds up to 6000 Mbps. With eight-performance internal antennas, this router is ideal for large houses, businesses, or services that require high bandwidth. So, this router can also be a good choice for gamers or streamers. 

However, the various range of features doesn’t isolate the router from common issues. Just like any other router, the Netgear Orbi AX6000 router has several glitches too. 

Many Users Have Reported  Netgear Orbi AX600 Glitches 

Occasional Drops in the Connection

Speed drop is one of the most common problems you may have heard of in the router world. There are numerous causes of this, but it can be resolved as well. However, we understand that this can be frustrating if you are in the middle of some work.

Low Speed 

You may have bought the router after seeing thousands of advertisements flooding about the Netgear Orbi AX6000 speed. Don’t lose hope if you see your WiFi 6 mesh router performance go off. 

There may be many causes contributing to this, such as the number of devices getting connected to the router, the distance between the router and the devices, interference from other electronic devices, and so on. Do you identify any of these causes to drip off your Netgear Orbi AX6000 speed? 


Many users have reported that their router overheats under a heavy load. This causes the router to perform poorly or even shut down. 

If you have been seeing any of the glitches, don’t freak out. These are very common, and you will almost find all of these glitches in many other routers as well.

Common Troubleshooting Tips to Follow

Restarting router

  • Simply restarting the Netgear Orbi AX6000 can restart the router. 

Updating router firmware

Changing the channel of the router

  • Using a crowded channel can interfere with and slow down the router’s speed. Try changing the channel and checking whether the router’s performance can improve. 

Moving the router to a different location

  • We suggest you move your router to a different location because sometimes your router is placed in a location surrounded by walls that interfere with and slow your router’s speed.

Apart from that, there are various other ways to improve and maximize Netgear Orbi AX6000 router performance.

Other Ways for Performance Boosting are:

Wireless Band Selection

The Netgear Orbi AX6000 router supports both 2.4 GHz and 5 GHz bands. The latter optimizes speed and makes your router work faster. It is less congested than 2.4 GHz.

Security Settings

You can enable WPA-3 encryption for security and performance. It is the latest WiFi security standard that provides better protection against security.

Enabling Guest Network

If you have a lot of guests coming around and getting connected to your network, it is time for you to create a separate guest network for the router. It doesn’t affect your router’s network performance.

MU-MIMO (Multi-User, Multiple Input, Multiple Output)

Ensure that you enable MU-MIMO on your router. It lets your router communicate with multiple devices simultaneously and improves efficacy and router performance.

Using the Orbi App

If you have been wondering about Netgear Orbi AX6000 router performance, you can use the Orbi app to monitor the network and check for firmware updates.

If you have applied all the above and still have connecting issues, you can also fix the problem all by yourself. For specific issues related to the Netgear Orbi AX6000 router, you can get help from technicians online. 

Internet Issues? We’ve got you covered

Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!

Guide For Setting Up the Netgear Nighthawk XR1000 For Gaming

Looking for gaming routers? Well, you have just landed on the right page to learn about one of the best gaming routers, the Netgear Nighthawk XR1000.

With features like gaming tools, an OpenVPN server, a media server, an AD blocker, and content filtering, the Netgear XR1000 has won a million hearts. However, for users who are okay with routers other than gaming routers, wait until you read the whole thing. Its complicated personality will leave you wondering whether you want to love it or like it as a best friend.

The Netgear Nighthawk XR1000 has completely exciting and cool features, so chances are you will love it.

In this blog, we are going to look at the step-by-step guidelines to set up your Netgear Nighthawk XR1000 router.

Steps to Set Up the Netgear Nighthawk XR1000 Router

Netgear Nighthawk XR1000 Router for Gaming
  • Use an Ethernet cable to connect your router to the modem
  • Turn on the modem and the router
  • Connect your device to the router
  • Go to the web browser and log in to your router’s admin interface
  • Enter the default IP address.

(Default credentials are ‘admin’ for username and ‘password’ for password.)

  • Change the password, once you have logged in to the account

Now there are certain things that you need to follow:

Update firmware

Updating the firmware improves the functionality and speed of the router. So, gaming performance increases with this speed enhancer.

Check whether any updates are available or not. If you see any firmware available, you can download and install it right away.

Setting up QoS (Quality of Service)

  • Open your router’s dashboard. 
  • Go to QoS settings 
  • Enable it and set the router for the gaming device
  • Prioritize the device by setting it to a specific QoS

Port Forwarding

  • Go to the Port Forward section of the router settings.

Manufacturers require a list of ports like TCP/UDP 3074 (for Xbox Live), TCP/UDP 80, and 443 (for general online gaming)

Optimize WiFi

  • Configure your WiFi for optimal performance, like WPA2/WPA3 

Enable Guest Network

Test Your Connectivity

Once you are done with all the changes, you can test the connectivity to ensure that everything is working properly. Use an online speed test to test the speed.

The router interface varies, so the settings will be slightly different. You can consider the above steps to optimize your Netgear Nighthawk XR1000 router for gaming.

Internet Issues? We’ve got you covered

Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!

Steps to Configure Netgear Router

In this fast-evolving world, having smooth connectivity resolves half of the issues. However, many get baffled on how to configure Netgear router to modem. Having a Netgear router resolves half of the issue. So, whether you are using your old network or connecting to the new one, it is important to follow the steps for the Netgear router configuration. 

By following these steps, you will be able to enjoy seamless connectivity.

Step-by-step guideline to Provide Seamless Connection

Before you follow the guidelines, let’s look at the equipment you need. This includes a Netgear router, a power adapter for the router and modem, and an Ethernet cable. 

Now, let’s look at the process:

Firstly, turn off all the devices, router, modem, and device

Step 1: Use one end of the Ethernet cable to connect the modem to the internet port or WAN. 

Step 2: Use the other end of the Ethernet cable to connect your device to the LAN port. 

Step 3: Turn on the modem and wait for a while to fully restart.

Step 4: Turn on the Netgear router and wait for the power button to turn green.

Now it’s time for Netgear router configuration. 

Steps for easy Netgear Router Configuration

  • Go to Router’s Admin Interface
  • Open the web browser and enter the router’s default address. 

(You can find the default address in the router’s manual for your specific IP address; it can either be or

This will direct you to the router dialogue box. 

Login to Router Interface

  • The default login credential is ‘admin’ for username and ‘password’ for password.
  • Upon entering the username and password, you will be directed to the Netgear Genie Setup wizard.

(If you are directed to the Smart Wizard Interface, we have outlined the process for you.)

  • Go to Advanced>Setup Wizard>Yes>Next

The setup wizard will take only a few minutes to detect your internet connection, when done, it will show up ‘Congratulations.’

You can also verify your internet connection. Simply, go to ‘Take me to the Internet’ to check if your connection is working or not.

How to Configure Netgear Router through Smart Wizard Interface?

Follow the above process and log in to the router’s interface with the default username and password. If you have changed your password and username, use them.

  • Go to Setup Wizard>Yes>Next>Next
  • When you click Yes, you will be asked about detecting your internet connection. When the internet connection is detected, click Next. 
  • Save the settings and your router is configured to use. 

Netgear Router Configuration using DSL (Genie Interface)

What is DSL Microfilter?

It is a small box that connects the telephone and the router to the telephone jack. 

  • Use the DSL microfilter to connect the Netgear router to the telephone jack. 
  • Use a telephone wire to connect the telephone to the DSL microfilter.
  • Use an Ethernet cable to connect your device to the LAN port.
  • Turn on the router by connecting it to the outlet. 
  • Login to the router admin interface using the default username and password. 
  • Go to Netgear Genie Setup Wizard>Advanced>Yes>Next> Select your country>Next.

(Your router will take a moment to detect your connection, and once the router detects the connection, your router login screen will appear.)

  • Type the username and the password provided by the ISP.
  • Click Next (this will help you access the ISP network).
  • Click on Take me to the Internet to verify the Internet connection.

Smart Wizard Interface

  • Follow the same process and log in to the router admin interface.
  • Go Advanced>Setup Wizard>Yes>Next

(Your router will detect the internet connection and display the right configuration page.)

  • Go to Detected Network Settings to finish the router configuration.
  • If you are using a PPPoE or PPPoA connection, log in and use the password given by the ISP. 
  • Enter the required information and Click on Apply. 

And your router will be configured!

These are some of the easy steps to configure your Netgear router. You can follow these steps to simply configure it and the best part is you can do it all by yourself.

However, if you have any issues related to the Netgear router, you can get in touch with our technicians and configure your Netgear router right at your home.

Internet Issues? We’ve got you covered

Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!

Decode Netgear Router WiFi Extender Lights [Explained]

You may have been using routers for a while. All this time, you may have seen that your Netgear wife extender lights have been blinking on and off with different colors. Have you ever guessed the meaning of those blinking lights?

Yes, when you are setting up your Netgear wifi extender, there are times of faulty connectivity issues. These colorful extender lights tell you about various issues. 

So, in this blog, we are going to learn about the meanings of those lights and what to do when you do a Netgear router setup and these blinking lights occur. 

Firstly, let us understand the LED status of your router. You may see two types of blinking patterns on the router. The router’s blinking lights indicate the process, data transmission, and errors. 

Slow and Steady Blinking 

If the router LED is blinking slowly and steadily, it shows that the router is attempting to make a connection. However, if the lights don’t stop blinking, there is an issue with the process.

Rapid Blinking 

When you get a rapid blinking light, then WiFi and Ethernet lights are working properly. These rapid blinking lights denote the transmission of data.

Now, you may find various options, like Router Link LED, Power LED, Client Link LED, WPS LED, Client Arrow LED, and Router Arrow LED. 

Router Link LED

This LED light helps to determine whether there is a strong connection established between the extender and the router. 

Router Link LED LightsPerformance What to do
Solid greenBest                  –
Solid amberGood                  –
Solid redPoorCheck the LAN cable

Power LED

Does your Netgear extender have a stable power supply? By knowing about these wifi extender lights, you can find your answer. 

Extender Power LED
Power LED lightsPerformance Indicator What to do
Solid amberRebooting extender Let the router reboot
Solid greenOn (extender)Connect to the device


Have you wondered what a WPS light is for? WiFi Protected Setup, or WPS, simplifies the process of securely connecting the device to the wireless network.

Extender WPS LED
WPS LED LightPerformance indicatorWhat to do
Solid greenSecurity enabledUse a secure WPS connection
Blinking green Connection in progresswait

Client Arrow LED

Does the Netgear extender have a stable connection between the extender and the device? Look at the following table to find out the answer. 

Client Arrow LEDPerformance Indicator What to do
Lit/steady blinkingAn extender is in good connectionContinue working 
Blinking Poor locationMove the device closer to the router

Router Arrow LED

The LED light helps to examine whether the Netgear extender and the Netgear router setup are done properly and are connected. 

Router Arrow LED
Router Arrow LED status Performance IndicatorWhat to do
LitGood location Continue using WiFi
BlinkingPoor locationBlink the device closer to the router and extender

In Short,

Now that you know the meaning of different Netgear WiFi extender lights, you have figured out half of your issues related to Netgear router setup. If you have been looking for online assistance or expert technical, we are here to help you.

Internet Issues? We’ve got you covered

Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!

How to Fix Common Netgear Router Security Error Issues

Dealing with issues related to the Netgear router? Persistent problems like connectivity issues and other complexities of Netgear router security setup are a daunting task. These connectivity issues halt your work, and you may encounter functionality issues and threats.

So, in this blog, we will look at the common troubleshooting steps with insightful solutions to get your Netgear router setup back on track. Let’s begin with further ado to resolve the issues with Netgear router security error.

Troubleshooting and configuration steps may vary depending on the Netgear router model. So, in this blog, we will discuss the general steps to be followed, but remember to enter your correct username and password before you start the troubleshooting method.

Reasons for the Netgear Router Security Error and How to Fix

Outdated firmware

If your firmware is not updated, it results in a security threat and may cause errors and lead to security threats. 

What to do:

  • Connect your device to the router
  • Open the web browser
  • Go to the router’s interface
  • Type or in the address bar
  • Go to the firmware update section 
  • Install the latest version

Using Default Passwords

Never keep on using the default password, as it is easy to get and allows unauthorized access.

What to do:

  • Change the default password 
  • Change the password for the WiFi network

Disabling WPA2-PSK/WPA3-AES Encryption

Outdated protocols like WEP or WPA can lead to security threats, so avoid using them. Enable the encryption to keep your router secured.

For this, 

  • Go to the router’s web interface
  • Enter password and username
  • Navigate to a wireless setting or wireless security
  • Go to encryption settings, like WPA2-PSK, WPA3-Personal 
  • Choose either or both
  • Save the settings 
  • Reboot or Restart the router

Enabled Remote Management

When remote management is enabled, it means that you can access it remotely too. This leads to unauthorized access and causes security threats.

What to do?

  • Go to the router’s web interface
  • Navigate to the section on remote management, remote access, or remote administration
  • Disable remote management 
  • Uncheck the box or select Off
  • Save and apply the changes
  • Exit the router’s web interface
  • Try to access it remotely

(If you are UNABLE to access it remotely, it is successful.)

Also, if you want to access your network remotely, consider a VPN.

Keep Tabs On Router Logs 

Check router logs to determine the number of failed login attempts and unauthorized access to identify security breaches.

To do this, 

  • Go to the router’s admin page
  • Enter the username and password
  • Go to Logs, System Logs, or Administrative events
  • Go to Log entries displayed in the table formats
  • Review it to detect suspicious events and keep an eye on the network activity

Turn Off Unused Features

Many used features, like guest networks, UPnP, remote administration, WPS, or used ports increase the risk of attacks and vulnerabilities. So, disable these features unless you need them.

Steps to turn off these features

  • Go to the router’s web interface
  • Go to Advanced Settings or Security Settings 
  • Uncheck the boxes next to the features you want to disable
  • Click on the Save button
  • Restart it after making the changes 

Here are some of the common issues with Netgear routers. As a result, your device can’t connect to the Netgear router. You can also find solutions to the common Netgear router security errors.

Contact 24×7 Router Support 

If you are still struggling with Netgear router security errors, our technicians are here to help you with it. Don’t worry if your Netgear router is not working; you can contact us and get the service right in the comfort of your home online.

Internet Issues? We’ve got you covered

Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!

How to Use a Router as WiFi Extender: A Comprehensive Guide

Living in a big house can give you some unique challenges. There can be several WiFi dead zones that leave your work completely interrupted. All you can do is use the router as an extender. 

In this blog, we are going to take a look at the steps on how you can use your router as a wifi extender. By doing so, you can boost your signal to the other ends of the house. As a result, you will have no WiFi coverage issues. 

However, the first thing you need to know is how to configure your router to extend its WiFi signal. This is otherwise known as Bridge mode or Repeater mode. 

Now, before using the router as a WiFi extender, make sure it has Bridge or Repeater mode. Not all routers have this capability.

Steps to Use Router as WiFi Extender 

  • Turn on the router and make sure it has WiFi signals
  • Update router firmware with the latest security features
  • Log in to the router’s admin settings
  • Go to the Wireless settings of the router and select Repeater mode

Keep note that the exact phase may differ depending on the router model. So, it may otherwise be called Repeating mode, Wireless Bridge mode, Extender mode, or Repeater mode. 
  • Go to the WiFi network and connect to it using Username and Password

Depending on the router model, the configuration steps may vary. You may be asked to give the Router’s IP address, admin information, and WiFi network login information.
  • Save the changes
  • Reboot the router, and your WiFi extender will work accordingly
  • Now place the router in the location where you want to extend the WiFi signal
  • Connect the device to this extended network to make sure that it works effectively

So, when you use router as WiFi extender, it may reduce the overall speed, but your house will be free of dead zones by extending and boosting your WiFi coverage.

Can Another Router be used as a WiFi extender?


If you have a spare router at home, you can use that router as an extender via an Ethernet cable. Although the steps may vary depending on the router model, the general process is the same.

In this section, let’s look at the common steps for extending Wifi signals using a router

Steps to Turn Router as Extender 

  • Update router firmware, especially if you have an old router at home
  • Connect the Ethernet cable to the Ethernet port of your older router
Router WAN Port
  • Plug the other end of the Ethernet cable into the WAN port to use it as a WiFi extender
  • Login to the admin settings using the IP address and login information
  • Go to the router’s wireless settings and then select AP mode
  • Apply, Confirm, or Save the settings

Choosing this will make your router an access point for the internet connection and extend WiFi beyond the main range. 

Now, don’t let those dead zones disrupt your work. Repurposing your router as a WiFi extender is a practical solution to expand your network reach. Just follow the outlined steps and maximize WiFi coverage instantly. 

Internet Issues? We’ve got you covered

Don’t let internet problems slow you down. Click here to access our 24/7 router support and enjoy uninterrupted internet connectivity!

10 Quick Steps to Configure Netgear Orbi Outdoor Satellite

Have you been facing connectivity issues? Are you dealing with a poor network? This is not a unique issue, and sometimes this is due to the Orbi outdoor satellite. Sometimes, the satellite is not properly placed. At other times, there are some other issues that your router might be facing. 

In today’s blog, we will be exploring the step-by-step guide to Netgear Orbi Outdoor satellite configuration. By learning about the steps, you can simply do it all by yourself, and you don’t have to rely on anyone or call a technician. 

Let’s explore further. 

What is the Netgear Orbi Outdoor Satellite?

It is a device used for extended WiFi coverage and increased signal strength. The purpose is to increase the connectivity of the network so that if you go outside the house, let’s say to the backyard, you can still get the connectivity right away.

However, it is not an actual device but a device that is placed within the reach of the network coverage. You don’t need to worry about a storm or hurricane because the device is completely weatherproof. So, there will be no interruptions in the functions of the satellite. As a result, once you install the device, you will get an additional 2,500 square feet of additional coverage. 

Netgear Orbi Outdoor Satellite Router Setup Steps

1. Place the Orbi outdoor satellite in the ideal location, especially within the reach of the Orbi satellite or Orbi router

2. Connect the satellite to the power outlet using the power adapter. Make sure your device is outside for extended coverage.

3. The satellite LED light will be on. Wait for the LED light to turn white, then it is ready to use.

4. Open the device connected to the WiFi and connect to the Orbi network. Type the default network name or SSID.

(You can find the default network name or SSID printed on the router label if you have not changed it.)

5. Open the web browser and type, or you can also use the default address,

6. You will be prompted to log in to the Orbi admin page with a username and password. The username and password are admin and password, if you have not changed them.

7. After logging in, go to Advanced> Wireless Settings> Add Outdoor Satellite or anything similar. You may find something else or some other option instead of adding an outdoor satellite. It typically depends on the router options.

8. Follow the on-screen setup wizard, which typically includes scanning nearby Orbi devices. Once it detects the outdoor satellite, you will need to select it.

9. Press the sync button on the outdoor satellite device, and the device will sync with your Orbi network.

10. Then, your satellite will be connected and configured to your network. It may take a few minutes.

Finally, once you are done with these simple 10 steps, ensure that the device is connected to the satellite for extended connectivity. 

However, if you are still experiencing connectivity issues with the Netgear Orbi Outdoor satellite, there are certain things to keep in mind. In the following, we are going to give you some small tips on Orbi outdoor satellite troubleshooting.

  • Keep the device away from metallic objects, electronic objects, and thick walls.
  • For temporary connectivity issues, unplug the satellite and wait for 10 seconds, then plug it back in.
  • Reboot the outdoor satellite along with the router reboot. 
  • Check for firmware updates.
  • Perform a factory reset on the outdoor satellite.

Contact 24×7 Router Support

If you have been facing any issues regarding the Netgear Orbi Outdoor satellite, get in touch with the technicians here. We help you resolve the Orbi extender setup so that you don’t have to call the technician at home. You can do it all by yourself with our assistance.